RAPID DELIVERY

to anywhere in the UK

10% OFF FIRST ORDER Use Code: ABCONEW2020

4000 Series High Pressure Power Pack

4000 Series High Pressure Power Pack

2500 Series High Pressure Power Pack

Please call for technical advice and pricing – 01636 813600

Availability: In stock

Quick Overview:

All 2500 Series units are two stage pumps. The first low pressure stage uses a gear pump which takes the pressure up to between 10 and 60 bar depending on the model. When reaching this pressure, the pump automatically unloads the first stage and then pumps on the high pressure radial pistons until the relief valve setting is reached.

£0.00
Availability: In stock
SKU
024

Description - Specification and Abbreviations:

RELIEVE VALVE

A tamper proof relief valve is fitted to all models and set to 700 bar unless otherwise specified. An adjustable relive valve is available as an option.

RESERVOIRS

Fabricated steel reservoirs are used (painted red or black) and are complete with filter breather, suction strainer oil level sight and magnetic drain plug. Most units have carrying handles and mounting holes in the base for installation to which rubber feet are fixed.

VALVES - The following range of valves are used.

ADV (Automatic Release Valve) Pressing the foot pedal starts the motor which generates pressure up to the relieve valve setting. When the foot pedal is released the motor stops and pressure is released allowing oil to flow back to reservoir. This valve is ideal for use on crimping and swaging machines. If controlled return of the cylinder is required, this valve should not be use. MRV (Manual Release Valve) This valve is similar to ADV unit but pressure is held by a check valve allowing pressure to be held for long periods. Pressure is released manually by the lever on the valve.

MRV (Manual Release Valve) This valve is similar to ADV unit but pressure is held by a check valve allowing pressure to be held for long period. Pressure is released manually by the lever on the valve.

MLS (Manual lever valve for Single Acting Cylinders) This has 2 positions: 1) Pressure connected to port A 2) Pressure and Port A connected to tank

MLD (Manual lever valve for Double Acting Cylinders) 1) Pressure connected to Port A and Port B connected to tank 2) Pressure returned to tank and Ports A & B blocked 3) Pressure connected to Port B and Port A connected to tank

AD (Air operated valve for Double Acting Cylinders)

1) Pressure connected to port A and Port B connected to tank 2) Pressure connected to Port B and Port A connected to tank

SS (Solenoid operated valve for Single Acting Cylinders)

1) Pressure connected to Port A

2) Pressure returned to tank and Port A blocked 3) Pressure and Port A connected to tank Valve is spring centered to position 2

SD (Solenoid operated valve for Double Acting Cylinders)

1) Pressure connected to Port A and Port B connected to tank

2) Pressure returned to tank and Ports A & B blocked

3) Pressure connected to port B and Port A connected to tank Valve is spring centered to position 2

MOTOR CONTROL

FS (Foot Switch) The foot switch works on a pneumatic principal. The pressure switch together with a fuse is mounted within the motor terminal box. A 2-metre cable is supplied for appropriate plug to be fitted.

MS (Motor Starter) A direct on-line starter complete with overload and no voltage trip is fitted to both single and three phase units.

 

Please contact us, we are happy to discuss technical advice, specification and pricing – 01636 813600

Write Your Own Review
You're reviewing:2500 Series High Pressure Power Pack